Crushed Concrete Driveway Problems? Find Out How You Can Fix These Huge Problems!
Crushed concrete driveway problems can occur if you don’t pay attention to what you’re doing when you build your driveway. It also serves to improve the driveway’s drainage, as well. In fact, the very use of crushed concrete in place of solid pavement on the driveway helps protect it from more serious erosion attacks.
If you’ve had issues with your concrete driveway, you probably understand how important it is to repair it properly from the start. Unfortunately, many people make the mistake of trying to repair their cracked and crumbling asphalt driveway on their own. For this reason, many homeowners wind up wasting lots of time and money in the process. For these reasons, it’s vital to learn about some common crushed concrete driveway problems so you avoid them in the future.
One of the main reasons you might have cracked or broken asphalt on your driveway is that you weren’t using recycled concrete. Many people mistakenly believe that using recycled concrete improves the life of their driveway. They are usually right, up until a certain point. While using recycled concrete does help reduce your overall costs and reduce waste, it won’t completely restore your cracked or broken pavement. Cracked and broken asphalt is merely a symptom of poor maintenance.
Crushed stone is another culprit for crushed concrete driveway problems
Unfortunately, some home improvement shops won’t tell you that using crushed stone in place of traditional asphalt is harmful. Instead, they’ll tell you that it’s “just like paving with gravel”. When it comes to safety, however, nothing could be further from the truth.
Using crushed stone instead of gravel drives is a serious matter. First of all, stone (especially crushed limestone) can chip and break very easily. Secondly, if you use crushed limestone in place of asphalt, you risk creating a watertight seal between your driveway and the ground. This can actually lead to more drainage problems because the water would get underneath the stone instead of seeping up through it. And finally, the water in the bottom of the stone can percolate into the soil beneath it, causing even more problems. So, if you’re dealing with cracked and broken asphalt or stone pavements, don’t use a stone crusher!
In addition to the above, another problem with using a stone crusher for cracked and broken asphalt and stone pavements is that you have to manually maneuver the crusher back and forth over your driveway. And, even if you manage to push the crusher back and forth over your driveway long enough to loosen the soil a bit, you run the risk of running the risk of the stone becoming permanently damaged. A better solution than this, then, is to use a professional stone repair contractor. If you really want to try to tackle this problem on your own, here’s what you can do:
First, you should widen your area of repair
This may seem like a pretty obvious answer, but it’s something that you should keep in mind if you have a cracked and broken asphalt apron or stone pavements that need repairs. When you enlarge an area, you open up room for repairs. Of course, you also increase the likelihood that your repairs will be successful. A good way to increase the likelihood of success is by making sure that your area is well lit and that you’re using a power washer to wash away any water or moisture that might be left behind.
Finally, you should never move a crushed concrete driveway or paved area
If you do, there’s a real chance that the paving will become permanently damaged. For this reason, never use power drills, lawn mowers, or electric drills on your paved driveway. Just because you think it might crack doesn’t mean it will!
